Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-185
Nur für den internen Gebrauch
Explorers
Payload
7.7.1.3 Display Device Settings
You can display the settings for a device.
WBM path:
WBM > Explorers > Payload > (double-click) Devices > (right-click) selected device > Display
Device Settings
The Device Settings mask is displayed. The name of the device (device type), the current op-
erating mode, the maximum number of B channels available for this device and, if applicable,
the communication protocol assigned are displayed for information purposes.
7.7.1.4 Edit Device Settings
You can edit the settings for a number of devices (currently only for the PPP device). For all
other devices, you can call up the function but none of the fields can be edited.
WBM path:
WBM > Explorers > Payload > (double-click) Devices > (right-click) selected device > Edit De-
vice Settings
The Device Settings mask is displayed. The name of the device (device type), the current op-
erating mode, the number of B channels available for this device and, if applicable, the commu-
nication protocol assigned are displayed for information purposes.
You can edit the following fields for the PPP device:
Min. No. of Channels Reserved for Device: In this field, specify the minimum number of
channels that must be available.
Max. No. of Useable Channels: In this field, specify the maximum number of channels that
can be used. To set the maximum number of useable channels, select Unlimited.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Device Settings mask reappears.