Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-201
Nur für den internen Gebrauch
Explorers
Payload
The CDP can only be loaded using the DLS and cannot be done separately. If a CDP is con-
figured but no CRL is displayed, then either the option Certificate validation with CRL verifica-
tion required is deactivated or a valid CRL could not by loaded from the CDP.
WBM path:
WBM > Explorers > Payload > (double-click) Signaling & Payload Encryption (SPE) > SPE CA
Certificate(s) > (right-click) SPE CA Certificate(s) > Display CDP and CRL
Procedure:
1. WBM > Explorers > Payload > (double-click) Signaling & Payload Encryption (SPE) > SPE
CA Certificate(s) > (right-click) SPE CA Certificate(s) > Display CDP and CRL. The Certif-
icate Revocation List Information mask is displayed.
2. No further steps.
Delete SPE CA Certificate
You can delete an imported SPE CA certificate, for example, if you need a new one.
WBM path:
WBM > Explorers > Payload > (double-click) Signaling & Payload Encryption (SPE) > SPE CA
Certificate(s) > (right-click) SPE CA Certificate(s) > Delete Certificate
Procedure:
1. WBM > Explorers > Payload > (double-click) Signaling & Payload Encryption (SPE) > SPE
CA Certificate(s)
> (right-click) SPE CA Certificate(s) > Delete Certificate. The Delete CA
Certificate for SPE mask is displayed.
2. Click Delete followed by OK in the confirmation mask (save the new configuration status
permanently with the Save icon in the control area).