Specifications

WBM Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
3-2 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-03.fm
Starting WBM
Miscellaneous requirements:
HiPath HG 1500 must be configured and started. All activities described in Chapter 2, "Prepa-
ring the Board" must have been performed.
Overview
You can activate the WBM from the Web browser – see Section 3.1, "Starting WBM". You can
administer all accessible board parameters over the Web-based interface – see Section 3.2,
"WBM Application Interface". A CLI access can also be used for a number of parameters – see
Section 3.3, "Alternative Management over CLI (Console)".
You can also call up information on the board’s integrated SNMP agents using SNMP Manage-
ment software – see Section 3.4, "SNMP Management".
In addition to the WBM, the HiPath 3000 Manager E is also provided for overall system admin-
istration – see Section 3.5, "HiPath Management with HiPath 3000 Manager E".
3.1 Starting WBM
User Account
The "Administrator" user ID is available for use with WBM. This ID enables you to access con-
figuration settings. You can use the initial installation wizard to configure several basic settings.
The default user name and password is: 31994. You may change this default data.
>
If a DNS server is configured on the administration PC but is not reachable, the WBM
interface operates at a considerably slower speed, especially when loading Java ap-
plets. If you experience a situation like this, check the DNS server set in the Admin-
istration PC’s network settings. Remove unreachable DNS servers or enter reach-
able servers.