Specifications

hg-08.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
8-1
Nur für den internen Gebrauch
Web Based Simulation Tool
Installation
8 Web Based Simulation Tool
This chapter describes how to install and use the Web-based Simulation Tool (WST) for
creating off-line configurations. You can save these configurations in files that can be loaded to
the relevant HG 1500 board using WBM or CLI.
8.1 Installation
8.1.1 General information
This following minimum requirements for WBM also apply to the WST:
Other browsers that support frames, Java and JavaScript may also be compatible with WBM.
Browsers that do not support frames cannot be used with WBM.
8.1.2 Installation
To install the WST on an administration computer:
1. Copy the "HiPathWST.<configuration>.HI-G15.3A.<nnn>.zipHiPathWST[...].zip" file to a
root directory that you created earlier.
2. Unzip the zip file in this root directory. When unzipping the file, make sure that the folder
names of the compressed files are maintained.
>
WBM is composed of HTML/XSL pages with frames. To use it, the following must be
installed:
● Windows 98SE, NT 4.0, 2000 or XP
● Java plug-in JRE 1.3.1
● Microsoft Internet Explorer 5.5 or 6.0
● XML Extension DLL V3.0 SP2 or SP4
● Explorer settings must permit the use of ActiveX and Java.
>
To operate WBM, you will need a PC with the following minimum requirements:
● 128 MB main memory (RAM)
● 400 MHz processor speed
● a mouse with left and right buttons