Specifications

hg-08.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
8-5
Nur für den internen Gebrauch
Web Based Simulation Tool
Sample Applications
8.4 Sample Applications
8.4.1 Basic Settings for an Individual Gateway
To make the basic settings for an individual gateway:
1. Collect the configuration data for the gateway.
2. Start WST and WBM.
3. Click the Padlock icon to activate write access (if not already active).
4. Reset the configuration to the factory settings (Maintenance > Configuration > (right-click)
Reset Configuration to Factory Default ...).
5. The configuration should comply with the recorded data.
6. Save the new configuration.
7. Load all configuration tables to a file.
To do this, open the download dialog and choose Select All Tables (Maintenance > Confi-
guration > Load from Gateway > (right-click) Load via HTTP).
You can use WBM to load this configuration file to a gateway and activate the new configuration
there.
8.4.2 Basic Settings for Multiple Gateways (Copying the Configuration)
Proceed as follows to make the basic settings for multiple gateways:
1. Collect the configuration data for the gateways.
2. Start WST and WBM.
3. Click the Padlock icon to activate write access (if not already active).
4. Reset the configuration to the factory settings (Maintenance > Configuration > (right-click)
Reset Configuration to Factory Default ...).
5. Set the configuration for the data that is identical for all gateways. The configuration should
comply with the recorded data.
6. Save the new configuration.
7. Load all configuration tables to a file.
To do this, open the download dialog and choose Select All Tables (Maintenance > Confi-
guration > Load from Gateway > (right-click) Load via HTTP).