Specifications

hg-08.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
8-7
Nur für den internen Gebrauch
Web Based Simulation Tool
Sample Applications
8.4.4 Modifying the Configuration for a Single Gateway
To modify the configuration for an individual gateway:
1. Collect the configuration data for the gateway.
2. Start WST and WBM.
3. Click the Padlock icon to activate write access (if not already active).
4. Load the configuration file for the gateway into the WST (Maintenance > Configuration >
Load to gateway > (right-click) Load via HTTP).
5. Edit the specific data for this gateway. Load all configuration tables back to a file.
To do this, open the download dialog and choose Select All Tables (Maintenance > Confi-
guration > Load from Gateway > (right-click) Load via HTTP).
You can use WBM to load this configuration file to a gateway and activate the new configuration
there.
8.4.5 Modifying the Configuration for Multiple Gateways (Multigateway
Administration)
If you want to make the same changes for a number of gateways:
1. Collect the configuration data for the gateways.
2. Start WST and WBM.
3. Click the Padlock icon to activate write access (if not already active).
4. Load the configuration file for the gateway back to WST (Maintenance > Configuration >
Load to Gateway > (right-click) Load via HTTP).
5. Set the configuration for the data that is identical for all gateways. The configuration should
comply with the recorded data.
6. Save the modified configuration.
7. Create a list of the gateways to which these configuration tables should be loaded
(Maintenance > Multigateway Admin > List of Gateways > (right-click) Add Gateway).
8. Select the tables to be distributed (Maintenance > Multigateway Admin > List of Configu-
ration Tables > (right-click) Edit List of Configuration Tables).
9. Use the WBM to save the modified configuration at every gateway and perform a restart.
>
Ensure that the gateways listed can be transferred.