Specifications

Web Based Simulation Tool Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
8-8 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-08.fm
Restrictions
8.4.6 Offline Diagnostics
To facilitate diagnostics with original gateway data in WST:
1. Use the WBM’s maintenance module to save the configuration data and the Admin, Events
and Trace log data in files.
2. Start WST and WBM.
3. Click the Padlock icon to activate write access (if not already active).
4. Load the configuration file for the gateway into the WST ( Maintenance > Configuration >
Load to gateway > (right-click) Load via HTTP).
5. Save the data and restart the WST.
6. Open the log files using a text editor.
You can now search the WST for configuration errors.
8.5 Restrictions
The following functions are not available in WST because:
● the relevant data is loaded from the HiPath 3000 and only displayed on the HG 1500,
● the operating system does not support certain functions,
● this function is not implemented in the simulator or
● an existing gateway is needed for this function.
User Accounts
The user accounts are transferred from the HiPath 3000 system and cannot be edited in WBM.
As the simulation is not linked to a HiPath 3000, two permanent IDs are set ("root" and
"31994").
DID Numbers
The DID numbers for system clients and H.323 clients are transferred from a HiPath 3000 sys-
tem and cannot be edited in WST.
>
You should save the gateway data in a file after modifying the configuration.