Specifications

hg-09.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
9-13
Nur für den internen Gebrauch
Technical Concepts
Configuration Rules for HG 1500 V8 in HiPath 3000 V6
9.4 Configuration Rules for HG 1500 V8 in HiPath 3000 V6
Relevant WBM functions:
See Section 7.1.7, "Quality of Service"
See Section 7.3.2, "LAN1 (LAN1)"
See Section 7.3.3, "LAN2 ([not used])"
See Section 7.4.4.6, "PSTN peers"
See Section 7.5.7, "Clients"
9.4.1 Static Configuration Rules
In HiPath 3000/5000 version 6.0, HG 1500 makes the resources described in Table 9-15 avail-
able in HG 1500 boards that have been defined as media gateways (= gateway HG 1500).
Table 9-16 shows the capacity limits (maximum numbers) of the relevant functions for each spe-
cific board.
Table 9-15 Technical data (resources) of the HG 1500 boards defined as media gateways
Resource HXGM3 HXGS3
HXGR3
STMI2
with-
out
PDM1
with 1
x
PDM1
with 2
x
PDM1
with-
out
PDM1
with 1
x
PDM1
with-
out
PDMX
*
Routing Channels
A routing channel is used, for example, to
set up a connection between two IP net-
works via ISDN (ISDN routing).
16 16 16
Gateway Channels (DSP Channels)
A gateway channel is needed, for example,
for the connection between an IP workpoint
client and a TDM workpoint client (e.g. opti-
Point 500) as well as to connect to the ITSP.
Two gateway channels are needed to con-
nect to an ITSP.
16 24 32 8 16 32
Fax/modem Channels (G.711) 16 24 32 8 16 32
Fax Channels (T.38)
These are special HW resources that make
it possible to use the Fax over vCAPI and
the Fax over IP functions with the T.38 pro-
tocol.
323