Specifications

Technical Concepts Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
9-44 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-09.fm
Fault Detection with Traps, Traces, and Events
Performance Traps
These traps indicate performance problems.
9.9.2 Traces
A trace logs the execution of a software component. A technician can use these process
records to find the cause of an error.
Trace results can be:
● saved in a log file and/or
● saved on a PC via a LAN connection.
Trap Recommended action
Board started successfully Information only, no action required
Reboot initiated by administrator, garbage col-
lection, VxWorks, H.323 or H.323 Stack
Adapter (HSA)
The reboot will be executed,
no action required
Memory problems
(memory full, memory allocation failed, mem-
ory is inconsistent)
Reboot will be executed automatically,
no action required
Internal software problem
(Check failed, "exit" event, problem with con-
figuring pool size, session setup)
Reboot will be executed automatically,
no action required
Flash memory capacity has been reached Remove any unnecessary files from flash
memory (this should only be done by a system
specialist)
IP network stack resources are exhausted Check the IP configuration of the gateway and
routers
SCN connection error Information only, no action required
Table 9-27 System Traps
Trap Recommended action
System memory is full None
DMA memory is full None
Temperature threshold on the board is ex-
ceeded
When using a ventilator kit: Check that the fan
is in proper working order.
Table 9-28 Performance Traps