Specifications

hg-09.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
9-45
Nur für den internen Gebrauch
Technical Concepts
Fault Detection with Traps, Traces, and Events
The following trace functions are available:
The possible settings are described in Section 6.6, "Traces".
If the load is particularly heavy, the board may not be able to process all trace information.
Please note the information at the end of Section 6.6.1, "Trace Format Configuration".
9.9.3 Events
Events notify you of system faults. Check the network configuration and/or gateway configura-
tion to clear up any abnormalities.
Depending on the setting and the class of problem, events can generate an SNMP trap, send
a message to the HiPath system, send an E-mail, initiate a trace observation and reboot the
board.
Events are always written to a log file (see Section 9.9.4, "Event Log Files").
Trace function Description
Trace format configura-
tion
Define which header is contained in the trace and how the trace data
is to be edited for the output format.
Trace output interfaces Define the interface via which the trace data is to be output.
Trace Log Loads trace results as a log file from the board to a destination com-
puter via HTTP and enables trace data to be deleted from the board.
Customer trace log The customer trace log of the HG 1500 can be displayed, loaded via
HTTP onto the administration PC and deleted from the flash memory
of the gateway.
Trace Profiles Groups the monitoring of individual components into customized
profiles. Profiles can be created, changed, started or deleted.
Trace Components Monitoring can be started or enabled and disabled for each compo-
nent individually. In addition, the data to be entered for each compo-
nent can be specified.
Table 9-29 Trace Functions