Specifications

WBM Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
3-10 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-03.fm
WBM Application Interface
Save icon (2)
This icon saves modified data. It can assume three statuses:
Changes are always made to the configuration that was active at the start of the session or to
the last configuration saved during the session. The modified configuration in the RAM is saved
as a new configuration in the flash memory.
Reset icon (3)
This icon triggers a gateway restart. It can assume three statuses:
Clicking the Reset icon will delete any unsaved changes which were made since the start of
the session or since the last time the configuration was saved. A warning is displayed before
unsaved data is deleted. If you click OK, the gateway will restart and the configuration from the
flash memory will overwrite the configuration in the RAM.
Action icon (4)
The icon turns green to indicate a live connection to the HG 1500 Web server. The icon flashes
red when there is no connection set up.
Data input is blocked. Users can read data, but they cannot edit entries.
Data can be entered but no changes have yet been made. (Data in the RAM
is identical to that in the flash memory.)
Data can be entered. Data has been modified but not saved. (Data in the RAM
differs from that in the flash memory.)
Data input is blocked. Users can read data, but they cannot edit entries.
Data input is active but no restart is required.
Data input is active. Data has been modified. The gateway must be restarted
to activate the modified configuration.