Specifications

hg-05.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
5-1
Nur für den internen Gebrauch
Wizard
Initial Setup
5Wizard
A wizard is made up of a number of dialogs that are called up one after the other. You can scroll
through the dialogs with Buttons Next Page and Previous Page. Specific complex tasks can be
performed by completing all dialogs in a wizard.
WBM currently supports a wizard for Initial Setup.
5.1 Initial Setup
Appropriate preparations should be made to organize the configuration of HG 1500 before
starting this wizard so that the wizard’s dialogs can be processed without unnecessary inter-
ruptions. Above all, ensure that the gateway was assigned the correct IP address before con-
necting it to the network. See also Section 2.2.1, "Configuration via CLI Interface".
Using the wizard for initial setup, you can:
● Enter the name and location of the gateway as well as a contact address,
● Configure the second LAN interface, and
● Configure Codec parameters.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Wizard > Initial Setup
The mask for Gateway Properties is displayed.
5.1.1 Gateway Properties
The slot number, gateway IP address, and the subnet mask are displayed for information pur-
poses. You can edit the following fields:
● System Name: Name of the system. Enter a character string in this field.
● Gateway Location: Information on the location of HG 1500. This information helps service
technicians to locate the gateway when the device has to be physically accessed. Enter a
character string.
● Contact Address: Information on a contact person. Enter a character string.
>
Wizards are only available if write access is provided. Write access is activated and
deactivated with the padlock icon (see Section 3.2.2, "Icons in the WBM Window’s
Control Area").