Specifications

Wizard Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
5-6 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-05.fm
Initial Setup
Authentication
● PPP Authentication: Specify whether authentication should be performed. If you select this
function, the following fields are added to the dialog:
– PAP Authentication Mode: Specify which type of authentication should be used for the
PPP connection (PAP Client, PAP Host, not used).
– PAP Pa s swo r d : Specify the password to be entered by the user for identification in the
case of PAP authentication. Data cannot be entered in the field if PAP authentication
is not used.
– CHAP Authentication Mode: Specify which type of authentication should be used for
the PPP connection (CHAP Client, CHAP Host, CHAP Client and Host, not used).
– CHAP Password: Specify the password to be entered by the user for identification in
the case of CHAP authentication. Data cannot be entered in the field if CHAP authen-
tication is not used.
– PPP User Name: Enter a user name of your choice that should be used for authenti-
cation via PAP or CHAP.
Data Compression
The STAC and MPPC compression algorithms are available for compressing PPP data pack-
ets. STAC is widely used in the UNIX world, while MPPC is the Microsoft alternative. Both al-
gorithms offer similar compression results. MPPC features a more robust resynchronization
mechanism to deal with packet loss and is the preferred option if transmission quality is low.
Please note that pre-compressed data (.ZIP files) and files containing binary data (for example,
audio/video files, *.exe files, etc.) cannot be compressed further and thereby transmitted quick-
er.
● STAC Data Compression: Specify whether STAC should be used for data compression.
● MPPC Data Compression: Specify whether MPPC should be used for data compression.
Address Translation
● NAT: Specify whether the "Network Address Translation (NAT)" function should be disabled
or enabled. The active function supports the following protocols: TCP, UDP, and ICMP (only
in passive mode).
● Address Mapping Enabled: Specify whether the "Address Mapping" function should be dis-
abled or enabled.