Specifications
hg-05.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
5-7
Nur für den internen Gebrauch
Wizard
Initial Setup
QoS Parameters of Interface
● Bandwidth of Connection (Kbps): Enter the required bandwidth of the connection in Kbps.
● Bandwidth Control for Voice Connections: Bandwidth control prevents the transmission
rates available from being overbooked with voice connections within a multi-link connec-
tion. In other words, when header compression is active, a maximum of five voice connec-
tions (G.729/60 msec or G.723/60 msec) is permitted over a B channel. Select this check
box if you want to activate the "Bandwidth Control for Voice Connections" function. This
function only affects connections from one HG 1500 to another.
● Bandwidth Used for Voice/Fax (%): Specify the percentage of available bandwidth that
should be used for voice/fax connections (see also Section 9.3, "Quality of Service (QoS)").
● QoS Capability: Enter the "Quality of Service (QoS)" that is supported by the other party:
– Identical: Both "DiffServ" and "IP Precedence" are accepted for the evaluation.
– DiffServ: The connection partner prefers to work with the evaluation of the "Differenti-
ate Services" 6-bit field (newer procedure).
– IP Precedence: The connection partner prefers to work with the evaluation of the "IP
Precedence" 3-bit field (older procedure).
Click Apply, then select Next Page to buffer your inputs and open the dialog for Codec Parame-
ters.
5.1.2.3 Dialog for the operating mode: DSL Connection Type PPPoE
You can enter the same inputs as for DSL Connection Type PPTP (see Section 5.1.2.2, "Dialog
for the operating mode: DSL Connection Type PPTP"), with the exception of the PPTP param-
eter.
Click Apply, then select Next Page to buffer your inputs and open the dialog for Codec Parame-
ters.