Specifications

hg-d.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
D-1
Nur für den internen Gebrauch
The CLI Command Interface
List of All CLI Commands
D The CLI Command Interface
We recommend administrating the gateway via WBM (Web-Based Management). However,
this does require that the gateway already has an IP address.
You can use the command line to enter various commands at a terminal connected directly to
the gateway without the need for an IP address. Commands can be used for the initial startup
and basic configuration and for monitoring certain counters and statistics.
There are two access options for using CLI commands:
● a terminal connected directly to the V.24 interface or a suitable terminal emulation program
(for example, HyperTerminal, Linux computer with Minicom application)
● Telnet applications (only in insecure mode).
Before using a Telnet connection, Telnet clients must be configured. Telnet is always enabled
by default.
D.1 List of All CLI Commands
The following table contains all the CLI commands. In addition to a brief description, the table
also indicates whether a write privilege is required for using the command. The following sec-
tions contain descriptions of the individual CLI commands classified according to area of activ-
ity.
>
Access via a Telnet connection is not possible when SSL is enabled. Therefore, data
cannot be modified via a Telnet connection in secure mode. The CLI commands are
then only available via the V.24 interface.
Command Description write
access
activate configuration Activates a newly loaded configuration file. no
activate software Loads the contents of a self-extracting file. yes
activate alternate
tftp
Switches from the primary to the alternative TFTP
server.
Ye s
activate tftp Switches from the alternative to the primary TFTP
server.
Ye s
add telnet client Adds a Telnet client. Yes
add wbm client Adds a WBM client. Yes
create ssl certificate Creates a certificate. Yes
Table A-10 Overview of CLI Commands