Specifications

hg-d.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
D-3
Nur für den internen Gebrauch
The CLI Command Interface
List of All CLI Commands
set ip address Assigns an IP address. Yes
set ip subnet Assigns a subnet mask. Yes
set tftp Selects the primary TFTP server. Yes
show arp cache Displays the current contents of the ARP cache. No
show boot Displays the start configuration. No
show default gateway Displays the IP address of the default router. No
show fingerprint Displays the fingerprint. No
show flash Displays the utilization ratio of the flash memory. No
show hostname Displays the gateway name. No
show if counters Displays the interface counter. No
show if states Displays the interface status. No
show ip address Displays the IP address. No
show ip subnet Displays the subnet mask. No
show memory Displays the utilization ratio of the RAM. No
show mode Displays the current operating mode. No
show routes Displays the entries for static routes. No
show telnet clients Displays the available Telnet clients. No
show tftp Displays which TFTP server is active. No
show time Displays the gateway time. No
show uptime Displays how long the gateway is enabled. No
show versions Displays the software versions available. No
show wbm clients Displays the existing WBM clients. No
upload configuration Copies the current configuration file to the TFTP
server.
Ye s
upload evtlog Loads the event log file to the TFTP server. Yes
upload trclog Loads the trace log file to the TFTP server. Yes
who has write access Displays who has write access. No
Command Description write
access
Table A-10 Overview of CLI Commands