Specifications

hg-d.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
D-5
Nur für den internen Gebrauch
The CLI Command Interface
Authentication
D.2.2 Interrupting the Boot Procedure
You can interrupt the start sequence within three seconds after activation by pressing any key
on the terminal. The session starts once the start password and root access rights are entered
(’Root Administrator’).
After authentication, the boot command line is available. This has other commands than the
conventional command line (for detail, see Section D.7, "Start command line").
D.3 Authentication
This includes commands for the write privilege and for configuring Telnet clients and WBM cli-
ents.
Write access
You must reserve write access for yourself before saving data, loading it onto the server or
downloading it from the server. To do this, you must check that no one else has already re-
served write access, then reserve it and release it after the task is completed.
who has write access
get write access
release write access
Configuring Telnet clients
The following commands are available for configuring access via Telnet and for using a restrict-
ed CLI command set:
add telnet client <IP address>
delete telnet client <IP address>
show telnet clients
Configuring WBM clients
The following CLI commands are available for adding or deleting WBM clients or displaying ex-
isting WBM clients:
add wbm client <IP address>
delete wbm client <IP address>
show wbm clients