Specifications

hg-d.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
D-17
Nur für den internen Gebrauch
The CLI Command Interface
Start command line
D.7.2.2 Start Parameters
The following parameters can be modified using the c boot command:
Parameters Description Sample value
boot device Start unit; available units: emac0 or tffs/ emac0
processor number Always zero. 0
host name Name of the host from which the system is
being started.
host1
file name Complete path of the module to be started. X_CG25_C.001
inet on ethernet (e) IP address of HiPath HG 1500
including the subnet mask as a hexadeci-
mal number
139.1.24.88:
ffffff00
inet on
backplane (b)
Not used, stays empty.
host inet (h) IP address of the BootP server from which
the system should be started.
139.1.1.30
gateway inet (g) IP address of a gateway node if the BootP
server is not in the same network as the tar-
get device.
139.1.21.13
user (u) Access name of the administrator for FTP.
ftp password (pw) Password for the FTP administrator name.
flags (f) Configuration options that are specified as
numerical values:
0x00 – Load the start configuration via FTP
(default)
0x02 – Load icon for local system
0x04 – Deactivate automatic startup
0x08 – Quick automatic start (no count-
down)
0x20 – Deactivate logon protection
0x80 – Load start configuration via TFTP
0x00
startup script (s) Startup script.
target name (tn) Name of the target system that is to be add-
ed to the host table (necessary).
other (o) Must always be set to "emac".
Table B-3 Start Parameters