Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-2 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Configuration
The configuration data is saved as plain text and can be read or printed using any text editor.
Reset configuration:
Right-click Configuration to display the following entry:
> Reset Configuration to Factory Default
WBM path:
WBM > Maintenance > Configuration > Configuration Data
The Configuration Data tree structure is displayed.
Entries under Configuration Data:
> Load from Gateway
> Load to Gateway
If SSL is enabled (see also Section 7.2.6.1, "Initial Configuration and Activation of SSL"), the
following entry is also displayed as a folder:
> VPN/SSL Data
6.1.1.1 Load from Gateway
This function is used for creating backups. You can save the current HG 1500 configuration ex-
ternally.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Con-
figuration > (right-click) Load from Gateway.
Select Load via HTTP or Load via TFTP from the context menu. Using HTTP, you can save the
data to the local file system. Using TFTP, you can load the data to a selected computer that has
an ftp server.
>
Always save the current configuration data before loading a new software image or
other configuration data. If for some reason the newly-loaded configuration data or
the new software image cannot be used, you can still revert to the previous configu-
ration level.
>
The Load via TFTP function is not available when SSL is activated (see Section
7.2.6, "SSL").