Specifications
hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-3
Nur für den internen Gebrauch
Maintenance
Configuration
Depending on your selection, either the Load Configuration from the Gateway via TFTP mask
or Load Configuration from the Gateway via HTTP mask is displayed.
You can edit the following fields:
● TFTP Server: This field is only available if you select Load via TFTP. Enter the IP address
of the server where the data should be saved. To save the data to this server, activate the
radio button beside the input field.
● Alternate TFTP Server: This field is only available if you select Load via TFTP. Enter the
IP address of an alternative server where the data should be saved. If the data should be
saved to this server, activate the radio button beside the input field.
● Remote File Name (PC File System): This field is only available if you select Load via TFTP.
Enter the file name under which the data should be saved.
● Specify Tables to Back Up: Use the check boxes and radio buttons below to determine
which data is to be saved. Choose Select all tables to select all tables. With Deselect all
tables none of the tables are selected. You can also select or deselect the tables individu-
ally.
Once you have selected the data to be saved, click Load. An information window is displayed
that you must confirm with OK.
6.1.1.2 Load to Gateway
This function is used for restoring data. You can load a HG 1500 configuration that is saved ex-
ternally to the gateway.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Con-
figuration > (right-click) Load to Gateway.
Select Load via HTTP or Load via TFTP from the context menu. Using HTTP you can load the
data from the local file system to the Gateway. Using TFTP, you can load the data from a se-
lected computer that has an ftp server.
Depending on your selection, either the mask Load Configuration to the Gateway via TFTP or
Load Configuration to the Gateway via HTTP is displayed.
>
The Load via TFTP function is not availableSection 7.2.6, "SSL" when SSL is acti-
vated (see ).