Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-6 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Configuration
6.1.2.2 Load to Gateway
This is the restore function for VPN/SSL data. You can load a VPN/SSL configuration of the
HiPath HG 1500 that is saved externally to the gateway.
WBM path:
WBM (Write access activated with the Padlock icon in the control area?) > Maintenance > Con-
figuration > VPN/SSL Data (double-click) > (right-click) Load to Gateway.
Select Load via HTTP from the context menu. The Load VPN/SSL Configuration to the Gate-
way via HTTP mask is displayed.
You can edit the following fields:
● Passphrase for decryption: Enter the passphrase that was set when backing up the data.
● Remote File Name (PC File System): Enter the file name under which the data is saved.
Once you have selected the data to be saved, click Load. An information window is displayed
that you must confirm with OK. The data is now loaded to the HG 1500 flash memory, however
it is not yet activated.
The mask Do you want to activate the configuration now? is displayed. Use the check boxes
and radio buttons below to determine which data is to be loaded. Choose Select all tables to
select all tables for activation. With Deselect all tables none of the tables are selected. You can
also select or deselect the tables individually.
Finally, click Activate Now. The gateway performs a cold start.
>
If you would prefer to activate the loaded configuration at a later date, click Do Not
Activate. If you would prefer to activate the configuration data at a later date, click
Job List in the Maintenance menu and activate the job (see Section 6.5, "Job List").