Specifications

hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-15
Nur für den internen Gebrauch
Maintenance
Multigateway Administration
6.4.1.8 Delete All Gateways
You can delete the entire list of gateways.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Mul-
tigateway Administration > (right-click) List of Gateways > Delete All Gateways
An important warning is displayed. Click Delete followed by OK in the confirmation mask (save
the new configuration status permanently with the Save icon in the control area).
6.4.1.9 Deselect Gateway for Distribution
You can remove an individual HiPath HG 1500 system from the configuration distribution. This
is only possible if the list of gateways contains entries (see Section 6.4.1.7, "Add Gateway"),
and if the selected gateway is selected for configuration distribution (green bullet point).
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Mul-
tigateway Administration > (double-click) List of Gateways > (right-click) [selected gateway] >
Deselect Gateway for Distribution
The gateway is removed from configuration distribution (save the new configuration status with
the Save icon in the control area).
6.4.1.10 Select Gateway for Distribution
You can select an individual HiPath HG 1500 system for configuration distribution. This is only
possible if the list of gateways contains entries (see Section 6.4.1.7, "Add Gateway"), and if the
selected gateway is not yet selected for configuration distribution (red bullet point).
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Mul-
tigateway Administration > (double-click) List of Gateways > (right-click) [selected gateway] >
Select Gateway for Distribution
The gateway is selected for configuration distribution (save the new configuration status with
the Save icon in the control area).
6.4.1.11 Display Gateway Properties
You can display the data of an individual HiPath HG 1500 system contained in the list of gate-
ways. This is only possible if the list of gateways contains entries (see Section 6.4.1.7, "Add
Gateway").