Specifications
Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-18 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Multigateway Administration
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Mul-
tigateway Administration > (right-click) List of Configuration Tables > Display List of Configura-
tion Tables
The List of Configuration Tables for Distribution mask is displayed. When distribution is activat-
ed (see Section 6.4.3.1, "Distribute Configuration"), the selected configuration data will be cop-
ied to the gateways selected for distribution.
Use the check boxes and radio buttons to determine which data is to be loaded. Choose Select
all tables to select all tables for distribution. With Deselect all tables none of the tables are se-
lected. You can also select or deselect the tables individually.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.4.3 Distribution
You can start distribution of the configuration. The List of Gateways and List of Configuration
Tables must be prepared appropriately first.
WBM path:
WBM > Maintenance > Multigateway Administration > Distribution
Right-click Distribution to display a menu containing the following entries:
> Distribute Configuration
6.4.3.1 Distribute Configuration
This function is used to distribute the configuration. In other words, the selected configuration
data (see Section 6.4.2.2, "Edit List of Configuration Tables") is transferred from the gateway
that is currently administered via WBM to all gateways selected for distribution in the list of gate-
ways (see Section 6.4.1, "List of Gateways"). You should only start configuration distribution
when the configuration tables and the list of gateways have been appropriately prepared.
>
Always save the current configuration data to the relevant gateways (see Section
6.1.1, "Configuration Data") before loading other configuration data via configuration
distribution. If for some reason the newly-loaded configuration data cannot be used,
you still have the previous configuration status as a backup.