Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-22 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Tra c e s
6.6.1 Trace Format Configuration
You can check/define which header data is contained in the trace and how the trace data is to
be edited for the output format.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra -
ces > (right-click) Trace Format Configuration
Right-click Trace Format Configuration to display a menu containing the following entries:
> Display Trace Configuration
> Edit Trace Configuration
6.6.1.1 Display Trace Configuration
WBM path:
WBM > Maintenance > Traces > (right-click) Trace Format Configuration > Display Trace Con-
figuration
The trace format configuration is displayed. For descriptions of the individual fields, see Section
Edit Trace Configuration.
6.6.1.2 Edit Trace Configuration
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra -
ces > (right-click) Trace Format Configuration > Edit Trace Configuration
The Trace Format Configuration mask is displayed.
Header data included in the trace output
● Global Trace Header Format Settings:
Activate this function to globally specify (for all selected trace components) which data
should be contained in the trace header. If this setting is activated, the corresponding set-
ting is deactivated for the individual components.
Once activated, the following header data is available for selection:
– Subsystem ID
– Task Name
– Task ID