Specifications

hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-23
Nur für den internen Gebrauch
Maintenance
Traces
–Time
– Module Name
– Line Number
Formatting trace data
● Full formatting with Parameter Expansion (default):
This is the default output mode. All data types are expanded. Trace output: normal. Suit-
able for normal mode.
● Limited Formatting (Message types only in Hex):
Message types are only output in hex format in this restricted mode. Trace output: fast.
Suitable for medium load.
● Limited Formatting (Message types binary, special X-Tracer format):
In this restricted output mode, data types are output in binary format. In other words, in the
same format as when the trace was performed. The binary format is intended to be used
for analysis with the X-Tracer tool. Trace output: fast. Suitable for medium to high load.
● Limited Formatting (only expansion of basic data types):
Only elementary data types are expanded in this restricted output mode (integer, short,
long, string, for instance). Trace output: very fast. Suitable for high load.
● Performance optimized Trace without Parameter Expansion:
Data types are not expanded in this output mode. This means that no expenditure is re-
quired for formatting trace data. Trace output: extremely fast. Suitable for very high load.
Click Apply followed by OK in the confirmation mask (save the new configuration status
permanently with the Save icon in the control area).