Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-24 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Tra c e s
6.6.2 Trace Output Interfaces
You can use this function to review or specify the interface that outputs trace data.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra -
ces > (right-click) Trace Output Interfaces
Right-click Trace Output Interfaces to display a menu containing the following entries:
> Display Trace Output Interfaces
> Edit Trace Output Interfaces
6.6.2.1 Display Trace Output Interfaces
WBM path:
WBM > Maintenance > Traces > (right-click) Trace Output Interfaces > Display Trace Output
Interfaces
The trace output interfaces are displayed: For descriptions of the individual fields, see Section
Edit Trace Output Interfaces.
6.6.2.2 Edit Trace Output Interfaces
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra -
ces > (right-click) Trace Output Interfaces > Edit Trace Output Interfaces
The Trace Output Interfaces mask is displayed. You can edit the following fields:
Console Trace
● Switch Synchron Console Trace On:
If this option is enabled, trace messages are not buffered. This means that any invoked
trace messages are immediately output to the console. This type of trace slows the soft-
ware and should only be used for diagnostic purposes. It is particularly suitable for perform-
ing traces for system crashes. If this option is enabled, all other trace interfaces are deac-
tivated.
● Switch Console Trace On:
Activate this option to output the trace data to the console at the V.24 connector.