Specifications
hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-25
Nur für den internen Gebrauch
Maintenance
Traces
File Trace
● Switch File Trace On:
Activate this option to write the trace data to a log file.
Trace via LAN
● Switch Trace via LAN On:
Activate this option to transfer the trace data via the LAN interface.
The following fields provide additional information:
● Maximum Trace Buffer Size (byte): The amount of log data saved to the buffer memory if
Switch File Trace On is activated.
● Maximum Trace File Size (byte): The maximum size of the log file if Switch File Trace On
is activated.
● Trace Timer (sec): The interval in seconds until data is written to the trace file if Switch File
Trace On is activated.
● Timer Value (sec): The interval in seconds until data is transferred if the Switch Trace via
LAN On option is active.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.6.2.3 Board Overload Caused by Trace Information
If the load is particularly heavy, the volume of trace information may be so great that the board
is unable to process it. Console overload is indicated by the message OAM Msg Queue [...]
full. Remove Messages. If this happens, carry out the following steps:
1. Deactivate the option Switch Console Trace On.
If the console remains overloaded:
2. Deactivate the option Switch File Trace On.
If the console still remains overloaded:
3. Activate the option Switch Trace via LAN On. Using a trace tool, the trace data is processed
via the connected LAN instead of via the board.
If the overload conditions continues even though the console trace has been disabled, the event
logs will also be included in the event log file on the board. The board can retrieve and display
the event log file. This allows you to determine whether the console is still overloaded.
7
Caution
All other trace interfaces are automatically deactivated if the trace is output via the
service center.