Specifications

hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-35
Nur für den internen Gebrauch
Maintenance
Traces
Procedure:
Proceed as follows to start the secure trace:
1. Select: WBM > Maintenance > Trac es > Trace Encryption > (right-click) Secure Trace Set-
tings > Start Secure Trace. The Start SecureTrace mask is displayed.
2. Enter the following data in the "Start Parameters" area:
● SecureTrace Activation Password: To restrict the use of the Secure Trace function, ac-
tivation is protected by a special password known only to the customer. This password
is therefore the customer’s key and the certificate is the service technician’s key. Both
keys are needed to start the secure trace
● Duration of SecureTrace (s): This is a mandatory entry.
3. Set the protocols for which the secure trace is to be created: All protocols in the "Secure-
Trace protocols" area are activated by default. Deactivate the protocols for which a secure
trace should not be generated:
● TC (TLS)
● H.323 Core/HSA (TLS)
● MMX (PEP)
● SIP Core/SSA (TLS)
● MSC (SRTP)
4. Click Start SecureTrace. The secure trace is generated.
Stop Secure Trace
WBM path:
WBM > Maintenance > Traces > Trace Encryption > (right-click) Secure Trace Settings > Stop
Secure Trace
Procedure:
Click Stop SecureTrace in the "Stop SecureTrace" mask.