User Manual
‘08 Series Notification Appliances
2576
s Industry, Inc.
Building Technologies Division
s
CatalogSheet
FireSafety &Security Products
‘08 Series Notification Appliances
HS – Horn and Horn Strobe Appliances Application: Indoor
Product Overview
– Fast installation with In / Out screw terminals using #12 to #18 AWG wires
– Synchronization can be accomplished using the Siemens DSC sync modules, FS-250 panel, XLS panel,
MXL panel, or PAD-3 power supply with built-in sync protocol
– Wall-mount flush to standard, 4-inch square box, double-gang boxes or surface mount to
MT-SUR-BOX back box
– 4-Wire, Horn Strobe Appliance allows for separate operation of the horn and strobe circuits
– 3 Selectable dBA settings of 90/95/99 dBA Anechoic in both tones
– Selectable Continuous Horn or Temporal (Code 3)
– Field Selectable Candela Settings: 15/30/75/110cd or 135/185cd
– UL Listed & ULC Listed;
FM, CSFM & NYMEA Approved
–
ADA / NFPA / UFC / ANSI compliant
– Complies with OSHA 29, Part 1910.165
Specifications
– Audible / visual notification appliance shall be Siemens Series HS Horn Strobe and
standalone Horn Appliances or approved equals
– Series HS Horn Strobe and standalone Horn Appliances shall meet and be listed for:
UL Standard 1971 (Emergency Devices for the Hearing-Impaired for Indoor Fire Protection Service)
UL Standard 464 (Fire Protective Signaling)
– Horn strobe shall be listed for indoor use only
– All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by the
Fire Alarm Control Panel (FACP)
– Series HS Horn Strobe and standalone Horn Appliances shall have a minimum of three (3)
field-selectable setting for dBA Anechoic levels, and shall have a choice of continuous or
temporal (Code 3) audible outputs
– Series HS shall be of low-current design
HS-MC Series
HS Series