HW-D450 HW-D451 Crystal Surround Air Track (Active Speaker System) user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
features Active Speaker System This unit features an Active Speaker System that provides high sound quality in a single slim unit. This unit does not require any satellite loudspeakers or speaker cabling, which are normally associated with conventional surround sound systems. Multi-function Remote Control The supplied remote control can be used to control the TV connected to this unit. The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button.
EnG WHAT’s inclUDED Check for the supplied accessories below. POWER TV POWER TV INFO VOL SOUND MODE INPUT SELECT S.
safety information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is a warning sign alerting you of dangerous voltage Inside the product CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
EnG PREcAUTiOnS 2.7 inch 3.9 inch 3.9 inch 3.9 inch Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
contents features 2 3 Features What’s included safety information 4 5 Safety warnings Precautions getting started 7 Before reading the user’s manual descriptions 8 9 Front panel Rear panel remote control 10 Tour of the remote control connections 11 12 13 functions 16 16 19 Basic functions Advanced functions Software upgrade troubleshooting 20 Troubleshooting appendix 21 Specifications 2 4 7 8 10 11 16 20 21 Installing the wall mount Connecting the wireless subwoofer Attaching
EnG getting started Before Reading the User’s Manual Make sure to check the following terms before reading the user manual. Icons that will be used in manual Term Caution Note ● Getting Started Icon Definition This involves a case where a function does not operate or settings may be canceled. This involves tips or instructions on the page that help each function operate. About the use of this user’s manual 1) Be sure to be familiar with Safety Instructions before using this product.
descriptions Front Panel 1 2 3 4 5 DISPLAY Displays the current mode. INPUT MODE Selects the Optical, Audio or W.iPod input. SOUND MODE Selects the sound mode. (MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, PASS (Original Sound)) VOLUME +/- Controls the volume level. POWER BUTTON Turns the Crystal Surround Air Track on and off. ▪ When you turn on the power of this unit, there will be a 4 to 5 second delay before it reproduces sound.
EnG REAR PAnEl ONLY FOR UPDATE ● DESCRIPTIOn 1 DIGITAL AUDIO IN 2 OPTICAL DIGITAL AUDIO IN 1 USB PORT You can update this unit's software through the USB port. POWER SUPPly cABlE Plug the power supply cable into the AC wall outlet. AUDiO in JAcK Connect to the analog output of an external device. DigiTAl AUDiO in 1,2 Connect to the digital (optical) output of an external device. ▪ When disconnecting the power cable from the wall outlet, hold the plug. Do not pull the cable.
remote control Tour of the Remote Control POWER BUTTON Turns the Crystal Surround Air Track on and off. POWER TV INFO Use this to display the TV channel information. VOLUME Adjusts the volume level of the unit. MUTE Mutes the sound from the unit. Press again to restore the sound to the previous volume level. 3D SOUND This feature adds depth and spaciousness to the sound. SMART VOLUME Regulates and stabilizes the volume level against a drastic volume change.
EnG connections INSTAllING THE WAll MOUNT You can use the wall mount bracket to mount this unit on a wall. Installation Precautions ● connections • Do not install on a place other than a vertical wall. • For the installation, avoid a location with high temperature or humidity, or wall that cannot sustain the weight of the set. • Check the strength of the wall. If the strength of the wall is insufficient for the product installation, make sure to reinforce the wall before the installation.
cOnnEcTing THE WiRElESS SUBWOOFER The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly) automatically when main unit is turned on. If the link indicator does not light when main unit and subwoofer are turned on, please set the ID by following the process below. 1. Plug the power cords of the main unit and subwoofer into an AC power supply. 2. Press the iD SeT button on the back of the subwoofer with a small, pointed object for 5 seconds.
EnG aTTaCHInG THE TOROIDaL FERRITE CORE TO THE POWER CORD OF THE SubWOOFER If you attach a Toroidal ferrite core to the power cord of the Subwoofer, it will help to prevent RF interference from radio signals. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make three loops in the power cable of the subwoofer. ● COnnECTIOnS 3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure shows and press it until it clicks.
USE iPod/iPhone WiTH A WiRElESS DOcK cRADlE FOR iPod/iPhone (Sold Separately (HT-WDc10)) You can enjoy finer quality of music through the speaker by sending iPod/iPhone’s audio signal using a Wireless Transmitter. To link the main unit with wireless transmitter, you have to make ID setting when both main unit and wireless transmitter are turned on. Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter. Then press inpuT SeleCT button on the remote control to select "W iPod" mode.
EnG connecting the CRYSTAL SURROUND AIR TRACK This section explains two ways (digital and analog) of connecting the unit to the TV. This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV.
functions basic functions POWER TV POWER POWER TV POWER Turning the power on/off TV INFO VOL SOUND MODE 3D SOUND AUTO POWER DRC SPK CONTROL S/W LEVEL TV INFO INPUT SELECT S.VOL DIMMER TV CH MUTE HDMI VOL TV CH MUTE AV SYNC 1. Touch POWER ( ) on the front panel. or, Press POWER on the remote control to turn on the power. AUDIO 2. Touch POWER ( ) on the front panel. or, Press POWER on the remote control again to turn off the power. AH59-02330A SOUND MODE 3D SOUND INPUT SELECT S.
You can select from 7 different sound modes (MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, PASS (Original Sound)) depending on the type of sources you want to enjoy. Press SOUND MODE on the remote control , or touch SOUND MODE ( on the front panel repeatedly to select the sound mode you want. SOUND SOUND MODE MODE EnG Using the sound mode ) SOUND MODE • Select PASS mode if you want to enjoy the original sound. TV POWER POWER TV POWER TV CH MUTE 3D SOUND SOUND MODE S.
POWER TV POWER TV INFO VOL POWER 3D SOUND SOUND MODE S.VOL INPUT SELECT TV POWER TV INFO VOL TV CH MUTE 3D SOUND SOUND MODE S.VOL INPUT SELECT DIMMER AUTO POWER DRC SPK CONTROL S/W LEVEL TV CH MUTE DIMMER AUTO POWER DRC SPK CONTROL POWER TVHDMI POWER AUDIO S/W LEVEL AV SYNC AH59-02330A VOL TV INFO INPUT SELECT S.
Samsung may offer upgrades for the Crystal Surround Air Track's system's firmware in the future. Please visit Samsung.com or contact the Samsung call center to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your Air Track. EnG SOFTWARE UPGRADE ONLY FOR UPDATE ▪ Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
troubleshooting Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced. • Is the unit properly connected to your TV? • Is the Mute function on? • Is the volume set to minimum? • Connect it correctly.
EnG appendix Specifications AC 120V, 60Hz Standby power consumption 0.75W Main unit Power consumption Subwoofer 45W Weight Dimensions (W x H x D) AMPLIFIER 20W Main unit 5.01 Ibs Subwoofer 12.01Ibs Main unit 37.66 x 3.62 x 1.77 inches Subwoofer 6.89 x 13.78 x 11.
Warranty LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Contact Center Web Site Area Spain Sweden Contact Center Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-0511 Code no.