User Manual

Intelligent Remote Alarm Lamps 6337
s Industry, Inc.
Building Technologies Division
s
Data Sheet
Fire Safety Products
Detection Devices
Intelligent Remote Alarm Lamps
Models ILED-HC and ILED-HW
ARCHITECT AND ENGINEER SPECIFICATIONS
• Multi-color light-emitting diodes (LEDs)
[GREEN | AMBER | RED ] mimics detector
• Becomes second accessory
(used with relay or audible base)
• Both lamps can be addressed and
independently controlled by fire
alarm control panel (FACP) logic
• Both lamps can be installed
anywhere on a device loop
card, Model DLC
• UL Listed and ULC Listed
Product Overview
The Siemens ─ Fire Safety Intelligent Remote
Lamps (Models ILED-HC and ILED-HW) are
designed for use with initiating devices that are
concealed or otherwise not easily within view
(e.g. – above suspended ceilings, under sub-
floors, in unexposed ventilating ducts, normally
locked vaults or closed rooms, etc.)
Both lamps can connect to either a Siemens
50-point, 252-point or 504-point addressable
control panel. Model ILED-HC is mounted on a 4”
(10.2 cm.) octagon outlet box, and Model ILED-
HW gets fastened on a single-gang electrical box.
Although there is no regulatory limitation for
mounting the lamps, be advised that Model
ILED-HC is often ceiling mounted, and Model
ILED-HW is intended for wall mounting.
These intelligent remote lamps can be mounted
anywhere on Model DLC, and are addressed
with the Device Program / Tester Unit (Model
DPU). Each LED can be controlled by FACP logic
─ even on different device loops or on another
panel in the network configuration ─ since
Model ILED-HC or Model ILED-HW is given its
own unique address.
Models ILED-HC and ILED-HW can also be
utilized as a second accessory of a detector
when assigned to respond to detectors that
have remote relay or audible bases.
Details for Ordering
Model
Part
Number
Description
ILED-HC
500-048809
Intelligent Remote Lamp, Ceiling
ILED-HW
500-048637
Intelligent Remote Lamp, Wall
ILED-HC
ILED-HW