User Manual

CSV file path
Setting for the folder in which the csv files and their MD5 checksum
files are saved during data migration.
The tool does not support UNC folder names.
If the csv files are saved to a different computer, the corresponding
path must previously be connected via the Windows Explorer.
You can also enter the path name by hand; but even then selection is
possible by clicking [...].
Report file path
Set the path and folder where the report files will be saved.
The tool does not support UNC folder names.
You can also enter the path name by hand or select it by clicking [...].
Cancels configuration. All previous settings remain active.
Closes the dialog box for the preferences. All settings are saved to
the "GlobalConfig.soap“ file in the installation folder, making them
available to the tool upon the next start.
16/47 For internal use only
Building Technologies Migrating ADP to InfoCenter CM110773en
Building Automation Operation 07.10.2006