User Manual

4.3.2 Mapping file provided to the tool

General

This file contains the mapping information for ADP data points to InfoCenter data

points, and must be provided to the migration tool to carry out migration. To create the

data point name mapping file, the csv file created in the "Data point name mapping –

creation" dialog box (see section 3.3) in the migration tool must be imported in an Excel

worksheet.

Excel then creates the final data point name mapping on a new worksheet, which is

then exported into a csv file with the following format:

#ADP-ReportitemId;IC-PointName;IC-PointDescription;IC-PointDataType;IC-PointUnit

Example

Illustration. 4-9

For internal use only 45/47

Building Technologies Migrating ADP to InfoCenter CM110773en

Building Automation Files 07.10.2006