Specifications

4 Communication settings and guide of HMI connecting with controller
If click “Connect+Write+Run+Monitor Start”, it will give a “Cannot Change PLC Mode”. Need to let the
run light go out by manual control, and then download. After download, let the run light keep on.
LS XGT CPU Direct protocol
Default communication: 115200, 8, none, 1; station: 0
RS232 communication
NOTE: Only support 115200 baud rate for the protocol; station number disable.
LS XGT Cnet protocol
Default communication: 9600, 8, none, 1; station: 0
HMI Setting
RS232 communication
- 162 -