Specifications

4 Communication settings and guide of HMI connecting with controller
D1 D2
l u
Press key T2 of about 1s
D1 D2
b 0
Press key T2 of about 1s
D1
D2
b 0
1s at about T2 button to display the value of d0, the initial value is 05
D1
D2
0 5
Press T1, respectively, and T2, you can adjust the value of b0, After release, while at T1 and T2 key until
the display or can be, Then press and T1 and T2, also show b0, then press the key T1 of about 1s,can switch
to b2, empathy can be modified the value of b2, b3, b4, modify the good, the same press T1 and T2 until
display “or” (where press T1 and T2 at the same time is the key to save and exit).
Well, after the change, restart the power, and then ping.
After the software is connected
◎Supported Device
- 182 -