Specifications

4 Communication settings and guide of HMI connecting with controller
HMI terminal 9pin D-
SUB female/male
Controller terminal
9 pin D-SUB (male
)
2 TXD
3 RXD
5 GND
com2
3
TX
2 RX
5
GND
8 TX
7 RX
5
GND
com0/com1
Ethernet communication protocol cable
Cross-connection or crossover network cable can be used as communication cable via the hub
Refer to
4.3 Download by Network Ethernet for method of making connection cable.
4.45 Memory map
◎Serial Communication
Series
CPU
Link Module
Driver
BMS005A-MC11 BMS005A-MC11 RS422 on the CPU unit
MemoryMap(Master-Slave)
◎System configuration
Series
CPU
Link Module
COMM Type
Parameter
Cable
BMS005A-MC11 BMS005A-MC11 RS422 on the CPU unit RS422 Setting
Your owner
cable
◎Communication Setting
HMI Setting
Default communication: 57600, 8, none, 1; station: 1
PLC Setting
Please refer to the manual of PLC for the configuration.
◎Supported Device
- 184 -