Specifications

4 Communication settings and guide of HMI connecting with controller
HMI terminal
9pin D-SUB female/male
1 RX-
6 RX+
5 GND
SDA-
SDB+
FG
RDA-
RDB+
4 TX-
9 TX+
Controller
RS422 terminal
com0/com1
NOTE: When PLC uses CP1W-CIF11 or CP1W-CIF12 module for communication, if it uses 1:1 and
RS422 communication, it need to set all the DIP Switch SW1~6 as OFF. If it uses 1:N and RS422
communication, it need to set DIP Switch SW1~5 as OFF and SW6 as ON.
RS485 communication cable
CP1W-CIF11/CIF12 module
com0/com1
HMI terminal
9pin D-SUB female/male
Controller
RS422 terminal
1 RX-
6 RX+
5 GND
SDA-
SDB+
FG
RDA-
RDB+
NOTE: When PLC uses CP1W-CIF11 or CP1W-CIF12 module and RS485 communication, please make
sure the DIP Switch SW1 of CP1W-CIF11 or CP1W-CIF12 as OFF, and set SW2,SW3,SW5,SW6 as
ON.SW4 can be set as ON or OFF.
Ethernet communication protocol cable
Cross-connection or crossover network cable can be used as communication cable via the hub
Refer to
4.3 Download by Network Ethernet for method of making connection cable.
4.55 OMRON E5EZ-R3(Temperature Controller)
◎Serial Communication
Series CPU Link Module Driver
OMRON E5EZ-R3 E5EZ-R3 RS485 on the CPU unit
Omron E5EZ-R3
◎System configuration
Series CPU Link Module COMM Type Parameter Cable
OMRON
E5EZ-R3
OMRON
E5EZ-R3
RS485 on the
CPU unit
RS485-2 Setting Your owner cable
- 253 -