Specifications

4 Communication settings and guide of HMI connecting with controller
AURORA PVI-6000-OUTD-US-W RS485 on the port Aurora PV
◎System configuration
Series CPU Link Module COMM Type Parameter Cable
AURO
RA
PVI-6000-OUTD-US-W RS485 on the port RS485
Setting Your owner cable
◎Communication Setting
HMI Setting
Default communication parameters: 19200, 8, none, 1; station: 2
◎Supported Device
Device Bit Address Word Address Format
Time Register（double word）
------ Time 0-9999.7 DDDDD.0
Energy Register（double word）
------ Energy 0-9999.7 DDDDD.0
Status variable Register（double word）
------ Measure 0-9999.7 DDDDD.0
Hardware version（double word）
------ Fireware 0-9999.7 DDDDD.0
Software version（double word）
------ Version 0-9999 DDDD
Device sequence No.（double word）
------ SN 0-9999 DDDD
Device ID（double word）
------ PN 0-9999 DDDD
Device work status ------ State 0-9999 DDDD
◎Cable Diagram
NOTE: AURORA Wind Inverter supports two connection modes, please refer to the manual of power-one
Corporation for details.
1. Connect with RS485 port
- 271 -