Specifications

4 Communication settings and guide of HMI connecting with controller
HMI terminal
9pin D-SUB female/male
Controller B port terminal
8 pin Mini Din (male)
1Rx-
6Rx+
5 GND
7Tx-
8Tx+
4 GND
4Tx-
9Tx+
2Rx-
1Rx+
com0/com1
4.77 Unitronics
◎Serial Communication
Series CPU Link Module Driver
Vision 130 V130-33-B1
RS232 on the CPU unit
Unitronics
RS485 on the CPU unit
◎Network Communication
Series CPU Link Module Driver
Vision 130 V130-33-B1 Ethernet I/F on CPU Unit
Unitronics Ethernet(TCP Slave)
◎Serial System configuration
Series
CPU
Link Module
COM Type
Parameter
Cable
Vision 130 V130-33-B1
RS232 on the CPU unit RS232
Setting Your owner cable
RS485 on the CPU unit RS485-2 Setting Your owner cable
◎Network System configuration
Series CPU Link Module Connect Type Parameter Cable
Vision 130 V130-33-B1 Ethernet I/F on CPU Unit Ethernet Setting Your owner cable
◎Serial Communication Setting
HMI Setting
RS232 default communication: 57600, 8, 1, none; station: 1
- 341 -