Refrigerator KI51R.. / KI41R.. / KI31R.. / KF31R.. / KI21R.. / KF21R..
en Table of Contents Safety and warning information ............ Information concerning disposal .......... Scope of delivery .................................... Room temperature, ventilation and cavity depth ...................................... Installation location ................................. Connecting the appliance ..................... Getting to know your appliance ........... Switching on the appliance ................... Setting the temperature ......................... Alarm function .....
en enTable of ContentsenI struction for Use Safety and warning information Before you switch ON the appliance Please read the operating and installation instructions carefully! They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you fail to comply with the instructions and warnings. Retain all documents for subsequent use or for the next owner.
en Important information when using the appliance ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 4 Never use electrical appliances inside the appliance (e.g. heater, electric ice maker, etc.). Risk of explosion! Never use a steam cleaner to defrost or clean the appliance! The steam may penetrate electrical parts and cause a short-circuit. Risk of electric shock! Do not use pointed or sharp-edged implements to remove frost or layers of ice. You could damage the refrigerant tubing.
en Information concerning disposal * Disposal of packaging The packaging protects your appliance from damage during transit. All utilised materials are environmentally safe and recyclable. Please help us by disposing of the packaging in an environmentally friendly manner. Please ask your dealer or inquire at your local authority about current means of disposal. * Disposal of your old appliance Old appliances are not worthless rubbish! Valuable raw materials can be reclaimed by recycling old appliances.
en Room temperature, ventilation and cavity depth Cavity depth A cavity depth of 560 mm is recommended for the appliance. If the cavity depth is smaller – at least 550 mm – the energy consumption increases slightly. Ambient temperature The appliance is designed for a specific climate class. Depending on the climate class, the appliance can be operated at the following temperatures. The climate class can be found on the rating plate. Fig. .
en Connecting the appliance After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance (see chapter “Cleaning the appliance”). Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance.
en Controls Fig. " 1 2 3 4 5 On/Off button Serves to switch the appliance on and off. “super” button Is used to switch on the super cooling (see chapter entitled “Super cooling”). Temperature selection button Press this button to set the temperature. Temperature display The numbers correspond to the set refrigerator compartment temperatures in °C. Alarm button Used to switch off the warning signal, see chapter “Alarm function”. Switching on the appliance Fig.
en Setting the temperature Refrigerator compartment Fig. " The refrigerator compartment is the ideal storage location for meat, sausage, fish, dairy products, eggs, ready meals and pastries. Refrigerator compartment The temperature can be set from +2 °C to +8 °C. Keep pressing temperature setting button 3 until the required refrigerator compartment temperature is set. The value last selected is saved. The set temperature is indicated on temperature display 4.
en Note the chill zones in the refrigerator compartment The air circulation in the refrigerator compartment creates different chill zones: ■ ■ Coldest zone is between the arrow stamped on the side and the glass shelf situated below. Fig. $ Note Store perishable food (e.g. fish, sausage, meat) in the coldest zone. Warmest zone is at the very top of the door. Note Store e.g. hard cheese and butter in the warmest zone.
en Interior fittings Sticker “OK” (not all models) (not all models) The “OK” temperature monitor can be used to determine temperatures below +4 °C. Gradually reduce the temperature if the sticker does not indicate “OK”. Glass shelves Fig. & If required, you can vary the shelves inside the appliance: To do this, pull out shelf, lift at the front and take out. Extendable glass shelf Fig. ' The extendable glass shelf can be pulled out for a better overview of the food. Vario shelf Fig.
en Cleaning the appliance m Caution ■ ■ ■ Do not use abrasive, chloride or acidic cleaning agents or solvents. Do not use scouring or abrasive sponges. The metallic surfaces could corrode. Never clean the shelves or containers in the dishwasher. The parts may become deformed! Proceed as follows: 1. Before cleaning: Switch off the appliance. 2. Pull out the mains plug or switch off the fuse! 3. Take out the food and store in a cool location. Place ice pack (if available) on the food. 4.
en Odours Light (LED) If you experience unpleasant odours: Your appliance features a maintenancefree LED light. These lights may be repaired by customer service or authorised technicians only. 1. Switch off the appliance with the On/ Off button. Fig. "/1 2. Take all food out of the appliance. 3. Clean interior (see chapter “Cleaning the appliance”). 4. Clean all packages. 5. Seal strong smelling food in order to avoid odours from forming. 6. Switch the appliance on again. 7.
en Operating noises Quite normal noises Droning Motors are running (e.g. refrigerating units, fan). Bubbling, humming or gurgling noises Refrigerant is flowing through the tubing. Clicking Motor, switches or solenoid valves are switching on/off. Preventing noises The appliance is not level Please align the appliance with a spirit level. If required, place something underneath. Containers or storage areas wobble or stick Please check the removable parts and re-insert them correctly if required.
en Fault Possible cause Remedial action The light does not function. The LED light is defective. See chapter “Light (LED)” section. Appliance was open too long. Light is switched off after approx. 10 min. When the appliance is closed and opened, the light is on again. Bottom of the refrigerator compartment is wet. The condensation channel or drainage hole are blocked. Clean the condensation channel and the drainage hole. See chapter Cleaning the appliance. Fig.
en Appliance self-test Customer service Your appliance features an automatic self-test program which shows you sources of faults which may be repaired by customer service only. Your local customer service can be found in the telephone directory or in the customer-service index. Please provide customer service with the appliance product number (E-Nr.) and production number (FD). These specifications can be found on the rating plate. Fig. .
! & "
# $ % & ' (
) * + , -
E - Nr FD - Nr .
9000825193 (9411) en