Data Sheet for Product

5
Siemens Industry, Inc.
A6V11178716_en
Smart Infrastructure
2021-06-16
Caution: Attach the sensor above the topmost position of the front slider, as otherwise de-
flection rollers are needed.
Alternatively, mount the cable on the back of the fume hood. Attach the cable to the counter-
weights.
Caution: Make sure there is sufficient space for service.
Mounting for sensing paths longer than 2032 mm (80 in):
The sensing unit must be extended e.g. by a
second, deflected cable for sensing paths
longer than 2032 mm (80 in).
Avoid attaching the cable hook to the sash's pulling string (risk of entanglement due to pulled
out pulling string). Using this method to extend the measuring distance will reduce the reso-
lution.
Disposal
The device is considered an electronics device for disposal in terms of
European Directive 2012/19/EU and may not be disposed of as domestic
garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.