Data Sheet for Product

ManualsBrandsSiemens ManualsRoom controlsRoom Condition Monitor, RPM series

1

2

3

Table Of Contents

Siemens Industry, Inc.

Page 3 of 4

Application Information

LCM P/N Application

Airflow Control Temperature Control

Application Notes

Device

Output Type

Application

Output

550-767C

2620

Venturi

High-speed

Modulating

Room Temp

Sensor

0-10V

Flow-Tracking, compatible with VAV fume

hood control. OCC and UOC states have

separate, selectable: >Differential Flow

Setpoint

>VAV or CAV Temp Control Mode

Room Temperature Offset for single-

point calibration and SECURE MODE for

Part 11 compliance solution.

2626

BTU Comp

[Discharge

Temp Req’d]

550-767D

2622

Venturi

Low-speed

Modulating

Room Temp

Sensor

0-10V

Flow-Tracking, compatible with CV2 fume

hood control. OCC and UOC states have

separate, selectable: >Differential Flow

Setpoint >VAV or CAV Temp Control Mode

Room Temperature Offset for single-

point calibration and SECURE MODE for

Part 11 compliance solution.

2628

BTU Comp

[Discharge

Temp Req’d]

550-767E

2621

Damper

High-speed

3-state

Room Temp

Sensor

0-10V

Flow-Tracking, compatible with VAV fume

hood control. OCC and UOC states have

separate, selectable: >Differential Flow

Setpoint

>VAV or CAV Temp Control Mode

Room Temperature Offset for single-

point calibration and SECURE MODE for

Part 11 compliance solution.

2627

BTU Comp

[Discharge

Temp Req’d]

550-767F

2623

Damper

Low-speed

3-state

Room Temp

Sensor

0-10V

Flow-Tracking, compatible with CV2 fume

hood control. OCC and UOC states have

separate, selectable: >Differential Flow

Setpoint >VAV or CAV Temp Control Mode

Room Temperature Offset for single-

point calibration and SECURE MODE for

Part 11 compliance solution.

2629

BTU Comp

[Discharge

Temp Req’d]

550-767G

2624

Damper

supply

Venturi

exhaust

Low-speed

Modulating /

Low-speed

3-state

Room Temp

Sensor

0-10V

Flow-Tracking, compatible with CV2 fume

hood control. OCC and UOC states have

separate, selectable: >Differential Flow

Setpoint >VAV or CAV Temp Control Mode

Room Temperature Offset for single-

point calibration and SECURE MODE for

Part 11 compliance solution.

2630

BTU Comp

[Discharge

Temp Req’d]

NOTE: Setpoint hardware adapter is required when using 10K duct sensor in place of room temperature sensor.