Data Sheet for Product
5
Siemens Industry, Inc.
A6V11402065_en
Smart Infrastructure
2020-07-30
Operation
Device Configuration
The Device Configuration menu is the series of menus that define all the operating parameters
of the Room Condition Monitor.
There are seven menu areas:
● Network – BACnet/IP or BACnet MS/TP network information is defined and tested.
● Inputs/Outputs – on-board or external hard-wired sensor points are defined.
● Room – room name, profiles and badges present are setup.
● Room Profile – Profile pull-down menus are defined, including icons, on-screen text and
monitor and controls presets are configured.
● Display – performance, timing and other visual aspect of the home screen are defined.
● Alarms – alarm general parameters, volume and mute timing.
● Security – defines Supervisor and Operator passcodes.
Maintenance
● The Room Condition Monitor is designed to operate in an indoor environment, monitoring
clean, dry air.
● Upon final installation of the Room Condition Monitor, no routine maintenance is required. An
annual check of system calibration is recommended. The unit is not field serviceable and
should be returned if repair is needed (field repair should not be attempted and may void
warranty). Be sure to include a brief description of the problem plus any relevant application
notes. Contact customer service to receive a return goods authorization number before
shipping.
WARNING
Do not blow into the pressure tubing or fittings with mouth, compressed air, or canned air.
Such actions may permanently damage the pressure sensor. Do not clean or wash-down with
industrial cleaners or solvents other than those approved in specifications. Do not immerse
unit.
Disposal
The device is considered an electronic device for disposal in accordance with
the European Guidelines and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that third-
party products are used.