Installation Instructions

Document No. 546-14410
Installations Instructions
August 16, 2013
Page 7 of 10
Figure 9. LCM-OAVS Slow Actuation Damper Supply/Damper Exhaust without BTU Compensation.
CAUTION:
See Figure 5 for how to correctly wire the Offboard Air Module(s).
The LCM-OAVS has two terminal blocks with terminations numbered identically
(terminations 1 through 16). DO NOT get these mixed up with each other.
If the LCM-OAVS is not connected as shown, it is not resistant to electrical surges. It
is also susceptible to interference from other equipment.
See Figure 6 for how to wire a 4-20 mA sensor at AI 4 (optional).