Data Sheet for Product
Table Of Contents
Technical Specification Sheet
Document No. 149-995
May 15, 2011
Siemens Industry, Inc. Page 1 of 13
Venturi Air Valve Accessories
Figure 1. Reheat Coil with Adapter Collar for Multi-Body Venturi
Air Valve.
Figure 2. Outlet View of 3’ Attenuator with Reheat Coil.
Siemens offers the following accessories for use with
the Venturi Air Valve:
• Reheat Coil, 1-row and 2-row, with adapter collar
• Reheat Coil, 1-row and 2-row, with 3’ or 5’ Fiber-
Free Foam Attenuator and adapter collar
• 3’ or 5’ Fiber-Free Foam Attenuator for supply
and general exhaust applications
The adapter collar fits the accessory to the Venturi
Air Valve of corresponding size. The closed-cell,
fiber- free foam insulation and reheat coils are
identical to those used with the Model LGS single
duct supply air terminal unit.
Features
• Same Reheat Coils as Siemens Model LGS
supply terminal.
• Adapter collar makes for easy field fit of
accessory to Venturi Air Valve.
• Adapter collars on single-body valves have two
access doors, allowing the installation contractor
to flip the coil section when connections need to
be on the opposite side.
• Attenuators use 3/4” closed-cell fiber-free foam
insulation.
• Insulation meets the requirements of NFPA 90A
and
UL 181, ASTM E84, UL 723 and ASTM C665
(bacteria).
Specifications
Materials (within air stream) - Standard
Duct Casing 22 GA galvanized steel
Reheat Coil 10 fins/inch
Insulation
3/4” thick closed-cell fiber-free
foam, meets the requirements of
NFPA 90A and UL 181
Dimensions
Weight
20 - 32 lbs (9.1 – 14.5 kg)