Environmental Declaration

EPD - Type II
Based on ISO 14021
GRD121.1U Damper Actuator; 7Nm
GRD126.1U Damper Actuator; 7Nm
GRD221.1U Damper Actuator; 7Nm
GRD226.1U Damper Actuator; 7Nm
GRD321.1U Damper Actuator; 7Nm
GRD326.1U Damper Actuator; 7Nm
Product line
Siemens BFG
Building Technologies Division
1000 Deerfield Parkway
60089, Bufalo Grove/Lake
Management System
since
by
Damper Actuator GAP GSFS
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Process control
Management System
since
by
ISO 14001 (Environment) 20.10.1998 SQS
ISO 9001 (Quality) 22.07.1986 SQS
Typical energy consumption variant *) see below
Maintenance
Fire protection according to
Fire load variant *) see below
20-PAP Corrugated fiber board Cardboard 209g
22-PAP paper Label 1g
22-PAP paper Installation Instruction 16g
Notes on disposal
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PBT; GF 20%; halogen-free Housings, Plug variant
PA66 SD10AF10CF10; AF 10%; halogen-free Bearing Ring 2g
One-way, recyclable
Not necessary
None
UL 60730, EN 60730
Environmentally compatible
product design
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Product use
Plastics
Risk of fire
Materials
Packaging
Page 1/3