Operating Instructions

Siemens Building Technologies, Inc. 5-1
5
Monitoring Laboratory Operation
Laboratory Room Graphics
An HVAC system operator can efficiently monitor the operation of an LRC room using Insight
graphics. To be displayed on a graphic, subpoints must be unbundled by creating a logical
point in the field panel with the appropriate address. Refer to your Insight manuals for
information on how to do this. System performance will be improved if controller points, such
as "Lab 1 Controller" are added to graphics in place of several subpoints, such as "Supply
Flow" and "Total Exhaust". This gives the operator convenient access to any controller
subpoint on a graphic by clicking on the controller information block and selecting "Report,
Controller Information". This procedure is described in detail in the
Insight for PCs 5-Volume
User Set
(125-1854).
Figure 5-1. Lab Room Graphic.