Operating Instructions

System 600 APOGEE Laboratory Room Controller Owner’s Manual
Index-2 Siemens Building Technologies, Inc.
LRC.................................................................2-1
LRC Configurations.........................................1-2
Configurations with General Exhaust..........1-2
Configurations without General Exhaust.....1-7
M
Maintaining Safety Records ............................5-4
Manually Commanding Occupancy ..............3-13
Commanding an LRC to Occupied Mode .3-13
Commanding an LRC to Unoccupied Mode.....
...............................................................3-13
Monitoring Laboratory Operation ....................5-1
Laboratory Room Graphics .........................5-1
Maintaining Safety Records.........................5-4
Periodic Verification of Safe Laboratory
Ventilation ................................................5-2
O
Occupancy report.................................3-12, 3-13
Occupancy Sensor........................................3-10
Occupied Mode
Commanding an LRC to Occupied Mode .3-13
Determining occupancy...............................3-9
LRC Priority ...............................................3-10
Manually Commanding Occupancy...........3-13
Methods of determining occupancy...........3-10
Scheduling Occupancy..............................3-13
Working with Occupancy and Ventilation
Setback..................................................3-12
override switch ..............................................2-11
Overview Report .............................................3-4
P
Periodic Verification of Safe Laboratory
Ventilation....................................................5-2
PID ..................................................................4-1
point database
list with descriptions and addresses6-1
through 6-5
Point Database................................................6-1
Pressure Report..............................................3-2
Pressurization .................................................3-4
Improperly pressurized building environment...
.................................................................3-4
Inaccurate flow reading ...............................3-5
Leakage from other spaces.........................3-4
Pressurization report.......................................3-5
Push Button...................................................3-10
R
Room Temperature
Setting room temperature ...........................4-8
Temperature control sequence of Applications
2603 and 2613......................................... 4-5
RTS................................................................. 2-9
S
Schedules.....................................................3-10
Scheduling Occupancy................................. 3-13
Setting Limits on Supply and General Exhaust
Flow.............................................................3-5
Setting the Flow Difference for Pressurization 3-4
Setting the Room Temperature ...................... 4-8
Setting the Unoccupied Flow Rates................ 3-8
slave mode ..................................................... 6-1
Start-up report..........................................3-5, 3-8
T
Temperature control sequence of Applications
2601 and 2611 ............................................4-2
Temperature control sequence of Applications
2602 and 2612 ............................................4-5
Temperature control sequence of Applications
2603 and 2613 ............................................4-5
Terminal Block................................................ 2-5
Troubleshooting Laboratory Airflow..............3-16
U
Unoccupied Mode...........................................3-6
Commanding an LRC to Unoccupied Mode3-
13
Cost of conditioning supply air ....................3-7
Cost of moving supply and exhaust flows...3-7
Hours of unoccupied operation...................3-7
Setting the Unoccupied Flow Rates............3-8
Ventilation setback......................................3-6
Using Air Flow Alarms ..................................3-14
V
VAV................................................................. 1-1
Ventilation Alarm...........................................3-15
Ventilation Setback.........................................3-6
Amount of setback possible........................3-7
Volume Difference Alarm.............................. 3-15
W
Working with Occupancy and Ventilation
Setback ..................................................... 3-12