9000.018 538_Umschlag.qxd 26.08.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 2 Operation Instructions Operating modes Exhaust-air mode: ❑ The extractor-hood fan extracts the kitchen vapours and conveys them through the grease filter into the atmosphere. ❑ The grease filter absorbs the solid particles in the kitchen vapours. ❑ The kitchen is kept almost free of grease and odours. Circulating-air mode ❑ An activated carbon filter must be fitted for this operating mode (see Filters and maintenance).
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 3 Before using the first time Important notes: ❑ The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. ❑ This extractor hood complies with all relevant safety regulations. Repairs should be carried out by qualified technicians only. Improper repairs may put the user at considerable risk. Do not use the appliance if damaged.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 4 How to operate the extractor hood Filters and maintenance Various types of grease filter can be used to absorb the grease contained in the vapours produced during cooking. The most effective method of removing vapours produced during cooking is to: ❑ Switch the ventilator ON as soon as you begin cooking. ❑ Switch the ventilator OFF a few minutes after you have finished cooking.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 5 Filters and maintenance Metal grease filter The filter mat is made of non-combustible metal. Caution: As it becomes more and more saturated with grease, the filter also becomes increasingly inflammable. The efficiency of the extractor hood can also be adversely affected. Important: Clean the metal grease filter at regular intervals.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 6 Filters and maintenance Activated carbon filter Extractor hoods with two filter cartridges: Warning: The halogen bulbs must be switched off and cool. 1. Depress the detent on the grease filters in the direction of the arrow and fold down the grease filter slightly. Detach the grease filter by pulling it towards yourself. Removing and installing the activated carbon filter Extractor hoods with a filter mat: 1. Remove the filter; see grease filter.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 7 Activated carbon filter Extractor hoods with two filter cartridges: 1. Remove the filter cartridge. ❑ See grease filter. 2. Insert the screw through the wing nut and the sleeve and screw in the middle screw in the false bottom (required only during the initial installation). Screw, sleeve and wing nut are enclosed with the activated carbon filter. 3. Using a screwdriver, press in the two lugs on the false bottom.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 8 Cleaning and care Switch off the extractor hood and isolate by pulling out the mains plug or switching off the disconnector on the installation side. ❑ At the same time as you renew the grease filter (see Filters and maintenance), clean off any grease from all accessible parts of the housing. This significantly reduces the fire hazard and ensures that the extractor hood performs as effectively as possible.
000.022 567.qxd 06.09.2006 11:36 Uhr Seite 9 Cleaning and care Halogen bulbs: 1. Switch off the extractor hood and isolate by pulling out the mains plug or switching off the disconnector on the installation side. When switched on, the halogen bulbs become very hot. Even for some time after the bulbs have been switched off there is still a risk of burns. 2. Remove the bulb ring with a screwdriver or similar tool. 3. Replace the halogen light bulb (conventional halogen bulb, 12 Volt, max.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 10 Installation Instructions: Important information Old appliances are not worthless rubbish. Valuable raw materials can be reclaimed by recycling old appliances. Before disposing of your old appliance, render it unusable. You received your new appliance in a protective shipping carton. All packaging materials are environmentally friendly and recyclable.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 11 Prior to installation Exhaust-air mode The exhaust air is discharged upwards through a ventilation shaft or directly through the outside wall into the open. D Exhaust air should neither be directed into a smoke or exhaust flue that is currently used for other purposes, nor into a shaft that is used for ventilating rooms in which stoves or fireplaces are also located.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 12 Prior to installation Optimum performance of the extractor hood: ❑ Short, smooth extraction pipe. ❑ As few pipe bends as possible. ❑ Largest possible pipe diameter (preferably 150 mm ø) and large pipe bends. ❑ Round pipes: We recommend for single-motor model, inner diameter of at least 120 mm for double-motor model.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 13 Electrical connection Installation The extractor hood must be connected to a correctly installed earthed socket only. Attach the earthed socket as close to the appliance as possible and in an accessible position. If the earthed socket is no longer accessible following installation of the extractor hood, a disconnector must be provided on the installation side. Disconnectors are switches with a contact opening of more than 3 mm and all-pole disconnection.
9000.022 567.qxd 06.09.
9000.022 567.qxd 06.09.2006 11:36 Uhr Seite 15 Installation Removal 1. Remove the filter grille (see operating instructions). 2. Connect the power. 3. Press the extractor hood up into the installation opening until the installation aid locks into position at the front and rear. 4. Screw in the extractor hood. 1. Loosen the screws. 2. Hold the underside of the extractor hood, Hold the underside of the extractor hood. Installation spring 3. Lower the extractor hood and remove. 5.
9000.018 538_Umschlag.qxd 26.08.2004 17:02 Uhr Seite 2 LZ 23000 0 28 0 53 28 0 53 28 0 53 LZ 72040 0 LZ 73040 0 30 0/7 38 0 38 53 LZ 73050 30 0/7 38 0 53 30 0/7 38 0 53 28 53 0 0 30 0/7 38 0 53 461423 481051 30 0/7 38 0 53 28 0 38 0 38 0 Siemens Elektrogeräte GmbH 0 /73 0 53 0 0 53 30 095660 0/7 53 30 0/7 53 9000 018538 Printed in Germany 0904 Hi.