Service manual

3
Servo Ventilator 300/300A Disassembling and assembling
E382 E380E 061 01 03 01 Siemens-Elema AB 87
Front panel film
 Separate the panel section from the
control section as previously described.
 Remove all front cover control knobs as
previously described. Remove only the
control knobs, not the complete controls.
 Remove all panel holders (1) that secures
the front panel plate to the frame.
 Lift off PC 1614 including the front panel
base plate (2).
 Lift off the front panel film (3) from the
frame.
Panel interface board PC 1614
 Separate the panel section from the
control section as previously described.
 Disconnect all front panel control
connectors (1) from PC 1614.
 Remove all nuts (2) holding PC 1614.
 On newer units: Remove all panel
holders (3).
 Carefully lift off PC 1614 (4) from the front
panel base plate.
When the panel interface board PC 1614
is separated from the front panel base
plate (e. g. as a spare or exchange part),
there are a number of components on
PC1614 that can be easily damaged.
Therefore, always handle PC 1614 very
carefully.
3
2
1
1
300-A29X
1
2
4
300-L26X
2
2
3